Claind – Hydrogen Generator – HyGen

Designed for Carrier Gas in GC, GC-MSD and “FAST GC”
UHP Purity that meets the needs required by the track analysis
Security system with audible alarms, display messages and automatic production stop in case of gas leaks
Available the automatic Switch with inert gas when Hydrogen alarm
Parallel connection from series up to 4 stacked generators

Overview

Features

Specifications

Technical Specifications

Flow Rate	200/400/600 Nml/min ± 10% a 2000 m slm (possibility to connect in parallel up to 4 stacked generators)
Technologies Employ	HT PEM electrolytic cell
Output Pressure	2 – 8 bar ± 3% /30 – 116 psi ± 3%
Purity	99,9999 % Oxygen < 1 ppm
Moisture	Better than -70℃ dew-point ATP at 20℃
Requirements of Demineralized Water	Required resistivity >1 MΩ cm @25°C; ASTM Type II Advised resistivity >10 MΩ cm @25°C; ASTM Type I
Electrical Supply	115/230 VAC (+/- 10%) 50-60 Hz HyGen 200: 110W HyGen 400: 180W HyGen 600: 250W
Index Of Protection	IP20
Noise	< 50 dBA
Operating Temperature	5℃ – 35℃ / 40°F – 95°F
Environmental Humidity	max 90% without condensation
Max Altitude	2000 m slm
Dimensions	Height: 40 cm + 7 cm (base) /15.8” + 2.8” Width: 38 cm/14.9” Width: 38 cm/14.9”
Weight	30 kg/67 lbs
Pneumatic Connections	Hydrogen output : G 1/8” female AISI 316 Exhaust: quick coupling for plastic pipe 4 mm Input demineralized water: flexible hose with 1⁄4” connection
Warranty	2 years

Modular configuration
Equipped with the innovative HT PEM cell for high purity
Removable water tank for easy cleaning and water change; automatic water loading pump included for external water supply
Maintenance: simple substitution of the deionizing bag and drier, only after 50.000l of H2 produced
CPU with Touch Screen Display connectable with CAN BUS to the generators (up to 32 units), allows the operational status monitor, showing menus with report alarms and functioning parameters
Hydrogen production proportional to consumption, with the minimum gas storage within the instrument
CPU equipped with LAN connection