Lauda – Ultracool Process Circulation Chiller
Process Circulation Chillers for Industrial Applications
LAUDA Ultracool chillers provide reliable temperature control and ensure secure processing. The models are plug & operate systems equipped with a cold water tank, a centrifugal pump and an internal bypass. All chillers are already equiped with an antifreeze protection thermostat to prevent freezing of the heat exchanger. Integrated pressure switches protect the circuit against pressure levels that drift too high or too low. Housings made from galvanized steel and externally coated with epoxy resin protects against corrosion even under aggressive ambient conditions. All models are suitable for outdoor installation.
Lauda – Variocool Circulation Chillers
Circulation Chillers for Variable Use in Laboratory, Mini-Plant and Production for Temperatures From -20 Up to 40°C
Circulation Chillers for Variable Use in Laboratory, Mini-Plant and Production for Temperatures From -20 Up to 40°C
LAUDA Variocool circulation chillers offer a broad performance spectrum for demanding temperature control tasks, The color TFT screen makes operation easy. A USB interface and an alarm contact are integrated as standard features. Additional interfaces are available as accessories. They are located in the front of the device, allowing for easy access.
The circulation chillers with their multitude of operations are very well suited to a number of different areas of application Optional pumps, for eample, enable higher pressures anf flows. Optional heating units, which are adapted to the cooling capacitym enable the quick heating of the connected application when needed.
Numerous Options, Compact Design, Easy Operation
Variocool circulation chillers function in an operating temperature range of -20 to 40°C. Optional heaters can be added to increase the maximum temperature to 80°C. For greater pressure requirements, optional pumps are available with the VC 1200 version or higher. All models are available as water-cooled versions (W) except VC 600. The compact dimensions of the models from VC 600 to VC 2000 (W) allows them to be placed under the laboratory table.
VC 3000 and VC 5000 offer cooling capacities of 3 and 5 kW, and are available with options such as outdoor-installation and sound absorption. VC 7000 and VC 10000 are high efficient tower design circulation chilolers are available as water cooled versions (W). High cooling capacities and flexible options such as additonal heating and pump power add to the devices’ area of application.
Lauda – Varioshake Shakers
LAUDA Varioshake shakers are characterized by high reliability and durable mechanics. Equipped with GFL Technology, all products embody the quality and many years’ experience of the former premium manufacturer GFL. They are pr...
LAUDA Varioshake shakers are characterized by high reliability and durable mechanics. Equipped with GFL Technology, all products embody the quality and many years’ experience of the former premium manufacturer GFL. They are primarily used in the field of biology and microbiology, in medical diagnostics, in laboratories, test institutes and research institutes, and in quality assurance. With different shaking movements and device properties, LAUDA shakers are the right choice for any application. They also run quietly and are completely reliable, even in continuous operation. They also reliably manage demanding applications with actively regulated temperature control and high temperature stability.
We offer LAUDA Varioshake shakers in the following variants:
- Reciprocating shakers
- Orbital shakers
- Tumbling shakers
- Rocking shakers
- Overhead shakers
- Shaking incubators
LAUDA shakers with comprehensive variation and adaption options
The LAUDA Varioshake product line encompasses models in multiple sizes, with various shaking motions. LAUDA shakers are available in different variants for a wide variety of applications and for containers of 15 to 50 ml. With accessories like adhesive mats, platform attachments and other equipment elements, the devices can be optimally adapted for any requirement. As a result, they are suitable for use in standard tasks, and as special solutions for individual requirements. Thanks to their compact design and small footprint, they can easily be integrated in existing laboratories.
Lauda – Water-Cooled Cooling Thermostats
Calibra...
Calibration and adjustment of temperatures from -25 to 200 °C with LAUDA calibration thermostats
LAUDA calibration thermostats provide constant temperature and homogeneity in calibration and adjustment in the test chamber. The ideal solution in comparison to heat cabinets and metal block thermostats, since liquid thermostats transfer heat in the temperature control liquid 40 to 60 times better than via air.
LAUDA Scientific – Surface Analysers – LSA 60
The modular LAUDA Scientific Surface Analysers LSA cover a wide range of applications, from quality assurance to research.
• Innovative features such as unique drop shape adjustment...
The modular LAUDA Scientific Surface Analysers LSA cover a wide range of applications, from quality assurance to research.
• Innovative features such as unique drop shape adjustments, telecentric lenses, high-speed video recording and flexible software with an impressive range of functions ensure precise results
• With the LAUDA Scientific LSA MOB you can measure any liquid in the smallest space, even in depressions and on vertical surfaces
LAUDA Scientific – Tensiometer – TD4
The TD4 is a compact ring/plate tensiometer, which, as a standalone device, offers maximum ease of use in research and development, as well as for quality control.
The graphic operati...
The TD4 is a compact ring/plate tensiometer, which, as a standalone device, offers maximum ease of use in research and development, as well as for quality control.
The graphic operating unit with touch-screen enables accurate tracking of measurements (even time-dependent measurements).
The pre-programmed standard methods, the GLP-compliant user management system, the optional equipment with a small Peltier-based thermostat (PTT+) and the intuitive user guiding make the TD4 a compact and precise measuring instrument.
Lauda Scientific – Viscothermostats with transparent bath
Economical Laboratory Heating Viscothermostats with Transparent Bath
Economical Laboratory Heating Viscothermostats with Transparent Bath
LAUDA ECO stands out due to its range of functionality and ease of use. A menu navigation in plain text allows easy operation of the devices. Both control heads are equipped with a mini-USB interface as standard. Further interfaces are available as modules. Another innovation is the practical allocation of a flow-rate switch at the front on the control head. This means that individual adjustment of the flow between internal and external circulation is possible even during operation.
Precise, Economical, Flexible
LAUDA ECO Viscothermostats are designed with transparent, polycarbonate baths which can provide necessary visibility for various applications. LAUDA ECO Viscothermostats are ideal for operation between 20 and 40°C. High level of homogeneity and performance are achievable via Variopump with six pumping levels and pump flow distribution. Operation is made easy via cursor and softkeys, while the simple design of the viscothermostats makes cleaning quick and easy.
LAUDA ECO Heating Viscothermostats – Control Head Silver
LAUDA ECO control head Silver with 2.0 kW heater power (230 V) are now perfectly suited for thermostatting tasks up to 200°C. They are fitted with a monochrome LCD display.
LAUDA ECO Heating Viscothermostats – Control Head Gold
LAUDA ECO control head Gold with heating power of 2.6 kW (230 V) have a working temperature of up to 200°C. They are provided with a larger colored TFT display. Temperature profiles can be displayed graphically. A comprehensive programer with five programs and 150 temperature-time segments is a further distinctive feature compared to Silver.
Mareno – Modular Cooking – Star 70 Bratt Pans
Tilting bratt pans are the most practical and advanced solution for preparing all sorts of dishes.
Technical Details
- Cooking tank in Aisi 304 stainle...
Tilting bratt pans are the most practical and advanced solution for preparing all sorts of dishes.
Technical Details
- Cooking tank in Aisi 304 stainless steel, thick bottom made of mild steel, Duplex and cast iron.
- Manual lifting of tank.
- Optional automatic tank filling.
- Double-skinned lid with drip section at rear. Sturdy Aisi 304 stainless steel hinges and spring balancing to guarantee maximum safety.
- Thermostatic temperature control from 90 to 280 °C for gas models, and from 100 to 285 °C for electric models.
- A microswitch cuts off the power supply when the tank is lifted.
- Gas bratt pans: Chrome steel burner and gas valve with thermocouple.
- Electric bratt pans: Armoured heating elements in Incoloy outside the tank.
Mareno – Modular Cooking – Star 90 Electric Cookers
Simple and reliable, electric ranges are valuable allies in the kitchen. Thanks to the direct temperature control system, they allow more rational management of power.
Technical Details
Simple and reliable, electric ranges are valuable allies in the kitchen. Thanks to the direct temperature control system, they allow more rational management of power.
Technical Details
- One-piece 2 mm thick pressed tops in 304PS stainless steel.
- Hotplates hermetically sealed to the pressed top.
- Each hotplate is equipped with a safety thermostat with automatic reset.
- Recessed spillage well with rounded corners to guarantee easy cleaning.
- Power supply VAC400 3N or VAC230 3.
- Countertop versions and freestanding models with electric oven.
Simple and reliable, electric ranges are valuable allies in the kitchen. Thanks to the direct temperature control system, they allow more rational management of power.
Technical Details
- One-piece 2 mm thick pressed tops in 304PS stainless steel.
- Hotplates hermetically sealed to the pressed top.
- Each hotplate is equipped with a safety thermostat with automatic reset.
- Recessed spillage well with rounded corners to guarantee easy cleaning.
- Power supply VAC400 3N or VAC230 3.
- Countertop versions and freestanding models with electric oven.
Mareno – Modular Cooking – Star 90 Pasta Cookers
The new Star 90 pasta cookers are designed to ensure greater output with easy use and maintenance.
Technical Details
Top with recessed spillage well, deep-drawn tank in Aisi 316L stainless stee...
The new Star 90 pasta cookers are designed to ensure greater output with easy use and maintenance.
Technical Details
Top with recessed spillage well, deep-drawn tank in Aisi 316L stainless steel with rounded corners. Automatic lifting module for pasta cooker baskets.
- Gas pasta cooker
Stainless steel burner outside the tank.
Gas safety valvle with thermocouple on the front panel and electric ignition pushbutton.
- Electric pasta cooker
Heating element in Aisi 304 stainless steel inside tank, rotates to facilitate cleaning at the end of each service.
MIKROSA 研磨加工設備
品牌簡介
MIKROSA品牌自1949年以來以頂尖的無心外圓磨削技術知名於世界。它可對切削邊磨削的精度進行測量。 並且我們我們不斷巨續發展無心研磨技術。我們不斷研...
品牌簡介
MIKROSA品牌自1949年以來以頂尖的無心外圓磨削技術知名於世界。它可對切削邊磨削的精度進行測量。 並且我們我們不斷巨續發展無心研磨技術。我們不斷研發所得的新型機床理念與創新成果，使得我們在當今世界上引領無心外圓磨床的製造
NanoFCM – Flow Nanoanalyzer
High Sensitivity Flow Cytometry for Nanoparticle Analysis
Flow NanoAnalyzer is expected to become a powerful tool for life science, nanoscience and nanotechnology studies. Flow NanoAnalyzer can be used for the multipara...
High Sensitivity Flow Cytometry for Nanoparticle Analysis
Flow NanoAnalyzer is expected to become a powerful tool for life science, nanoscience and nanotechnology studies. Flow NanoAnalyzer can be used for the multiparameter characterization of natural and synthetic nanoparticles (7-1000 nm) at the single-particle level, such as extracellular vesicles, mitochondria, bacteria, viruses, nanomedicine and naonomaterial. Combining light scattering and fluorescence detection, high-resolution distributions of particle size and biochemical properties can be acquired simultaneously in 1-2 minutes.
So far, the Flow NanoAnalyzer is the only real flow product in the world with the ability to analyze single nanoparticles, with outstanding detection sensitivity, excellent resolution and stable performance. At present, the company’s first-generation product is on the market, interested users can contact us for more details.
Nanotech – Diamond Turning Lathe – 250UPL, 450UPL
250UPL 450UPL machining machine tools
250UPL Compact Diamond Turning Lathe.
Simple to use and engineered for high productivity. Our latest generation of the most user friendly and compact ultra-precision CNC diamond turning lathe...
250UPL 450UPL machining machine tools
250UPL Compact Diamond Turning Lathe.
Simple to use and engineered for high productivity. Our latest generation of the most user friendly and compact ultra-precision CNC diamond turning lathe. Used for the rapid production of spherical & aspheric optical lenses, mirrors, mold inserts, freeform optics, and even mechanical components. If your application fits within a 350mm diameter window (with optional riser package), this machine may be the ideal solution for your ultra precision needs. Achieves both sub-nanometer level surface finishes and sub-micron form accuracies directly off the machine in a wide variety of materials.
450UPL Midsize Diamond Turning Lathe.
Only Nanotech offers a proven and established midsize ultra precision system. The 450UPLv2 is comfortably suitable for both single point diamond turning and deterministic micro-grinding of optical elements. Applications examples include the manufacture of components used in a wide variety of markets such as electro-optics, aerospace, defense, consumer electronics, bearing, and computer industries. As an ideal midsize option for our customers, the standard configuration of this popular machine model yields a 450mm diameter swing capacity, but increased swing capabilities are readily available upon request.
Nanotech – Diamond Turning Lathe – 650FGv2
650FGv2 Machining Machine
most versatile freeform generator
This latest generation of our true flag ship machine has been proven worldwide to be the most flexible, precise, and user friendly ultra precision freeform diamond turni...
650FGv2 Machining Machine
most versatile freeform generator
This latest generation of our true flag ship machine has been proven worldwide to be the most flexible, precise, and user friendly ultra precision freeform diamond turning system available. With a minimum of three precision linear X, Y, and Z axes, the 650FGv2 is expandable to a five-axis system via optional B & C rotary axes. With the main work spindle centrally integrated within an oil hydrostatic Y-axis carriage, advanced machining methods such as raster flycutting of linear diffractives and freeforms, micro-prismatic optical structures, micro-milling of aspheric lens arrays as well as Slow Slide Servo (S3) machining of toric, biconic surfaces are achievable.
NanoSMART® Windows Based Interactive HMI Control System
A high speed 64 bit Delta Tau PowerPMAC Motion Controller with the Nanotech’s own touch / swipe gesture HMI, NanoSMART. Three customizable 22″ wide screens are accessible by swiping left or right from the main screen. Ability to handle 5GB program file sizes, 4X faster processing speeds, remote diagnostics and a leading 8 picometer feedback resolution combine to make the new Nanotech 650FGv2 the most user friendly high performance multi-axis diamond turning system available. We welcome you to experience the difference for yourself!
Nanotech – Drum type turning lathe – HDL2000
This machine is available in two versions: the HDL2000-SD and HDL2000-HD. These are extra large capacity ultra-precision machining systems used for single point diamond turning advanced optical surfaces along the diameter of large generation drums...
This machine is available in two versions: the HDL2000-SD and HDL2000-HD. These are extra large capacity ultra-precision machining systems used for single point diamond turning advanced optical surfaces along the diameter of large generation drums. This machine accepts drums up to 650mm diameter and 3100mm long (between chuck faces) with a weight capacity of 1800 Kg (3000 Kg on HD version). Maximum optical cutting zone length is 2600mm.
test block for Laos
Your download – just a few steps away
Please enter your details here:
test
Contact us
Contact us