“ATTO Phelios” luminometer offers superior performance for measuring bioluminescence and chemiluminescence in flash and glow assays with high sensitivity and reliability, and it is a useful tool for diverse applications from ELISA to cell based assays.

Since 1980, ATTO has been developing luminescent detectors for HPLC. Our team developed measurement methods for biological activities of living cells by bioluminescence and chemiluminescence, and finally we commercialized microtiter plate reader “Luminescencer” in 1991. In 1997, ATTO released “Luminescencer JNR” as a luminometer for microtiter plates, followed by “Luminescencer PSN” as a luminometer for microtubes. The consistent innovation of ATTO has established it as a luminescence technology leader.

Furthermore, ATTO has developed a variety of basic technologies, including bioluminescent imaging, active oxygen measurement, multicolor separation, luminescent spectrophotometer, secretory luciferase (Cluc), and studied the mechanism of firefly luciferase reaction, global standardization of luminescent measurements, and near infrared measurement.

• Designed for Carrier Gas in GC, GC-MSD and “FAST GC”
• UHP Purity that meets the needs required by the track analysis
• Security system with audible alarms, display messages and automatic production stop in case of gas leaks
• Available the automatic Switch with inert gas when Hydrogen alarm
• Parallel connection from series up to 4 stacked generators

• High purity nitrogen guaranteed by the PSA technology CLAIND “Fast Purity” patent that allows the delivery of high purity nitrogen in a very short time
• UHP PSA technology available in a standard version and the HC version which ensures 100% removal of hydrocarbons (HCT< 0,1 ppm for applications with high-sensivity detectors)
• Parallel connection up to 4 stacked generators with tower configuration
• Modular configuration
• Facility to serve up to 12 FIDs/NPDs with makeup gas or up to 7 ECDs oppure 5 S/S
• Facility for integration with a Brezza series dedicated air compressor (AirComp)
• CPU with Touch Screen Display connectable with CAN-BUS to the generators (up to 32 units), allows the monitoring of operational status and menus with report alarms and functioning parameters

• Designed to satisfy the needs of all LCMS analyzers on the market
• The PSA technology with molecular sieves, used in the NiGen series, are drastically reducing the O2 and H2O residual but also the HC presence in the air, offering an extremelly pure nitrogen output (phthalate-free)
• Built-in compressor oil free including 2 x 50 l. tanks for Compressed Air and Nitrogen
• Highly reliabile Air compressor with maintenance required only after 16,000 hours of work
• 2 gas outlets available: UHP Nitrogen and Oil Free Air

• UHP Zero Air perfect for NPD, FID, FPD
• Parallel connection up to 4 stacked generators with tower configuration
• Modular configuration
• Equipped with PSA dryer
• Able to feed up to 8 FIDs
• Platinum Palladium HC system for HCT integral removal < 0,1 ppm for an absolutely stable and disturbante free baseline
• Easy integration with Brezza series dedicated air compressor (AirComp)
• CPU with Touch Screen Display connectable with CAN-BUS to the generators (up to 32 units), allows the monitor of the operational status, menus with report alarms and functioning parameters. The CPU include also an Ethernet output for the connection to PCs

ColdBlock™ Sample Digestion System is the first sample digestion technology using focused short-wave infrared (IR) radiation and a ColdBlock, which delivers exceptional performance even in difficult matrices. Digestion of refractory chromite takes 10 minutes without any requirement of perchloric and hydrofluoric acids.

Nanoscale Imaging Has Never Been Easier

Collect nanoscale topography data on your benchtop in three clicks with the nGauge AFM.

ICSPI has integrated all of the components of a traditional AFM onto a single 1 mm x 1 mm chip to create the world’s first single-chip AFM. That means that 250 AFMs can fit on the face of a penny.

The nGauge AFM uses micro-electro-mechanical systems (MEMS) to control the X, Y and Z position of the tip. This means that no alignment of lasers is required.

The nGauge is the smallest AFM in the world. Because the entire unit weighs less than 500 grams, the nGauge rejects building vibrations, so no vibration isolation table is needed, which makes the nGauge a true benchtop AFM.

 

What can I use AFM for?

AFM provides topographical data of a surface. That means that you can look at the shape and size of individual features, such as the pits on a DVD, or look at the particle density, such as the number of nanoparticles in an area.

The nGauge AFM can be used to investigate surfaces where the features are up to 10 µm tall. It’s tricky to pinpoint a lower limit, but the RMS noise in the vertical (z) direction of the nGauge is 1 nanometre (nm). So, depending on your requirements, features as small as 5–10 nm can be imaged with the nGauge with acceptable accuracy.

To put what a nanometer is into perspective, a quarter (25-cent coin) is about 2 cm wide. An E. coli bacterium cell is 2 µm wide (10,000× smaller than a quarter). And the diameter of a DNA helix is 2 nm (1,000× smaller than a bacterium).

The DT Series of analytical and high precision balances from LabPRO delivers the accuracy and performance required in a host of laboratory, industrial and educational applications. With the right blend of performance and features, LabPRO DT Series high precision balances offers high performance yet economical value for all your weighing needs.

The DT Series of analytical and high precision balances from LabPRO delivers the accuracy and performance required in a host of laboratory, industrial and educational applications. With the right blend of performance and features, LabPRO DT Series high precision balances offers high performance yet economical value for all your weighing needs.

Accurate dispensing from an easy to use dispenser. LabPro Bottle Top Dispenser is a cost effective, safe, efficient, and durable bottletop dispenser, it has a re-circulation valve that re-directs liquid into the bottle to allow bubble free dispensing without any loss of reagent. Its smooth and soft plunger mechanism makes it easy to use in a demanding laboratory environment.

LabPRO products are specially designed to offer high performance with Swiss accuracy yet with economical value. The new LabPRO Electronic pipettes are as easy to use as the mechanical micropipettes with only 2 buttons and 4 essential pipetting modes: Pipet, Repetitive, Mix and Reverse. They are essential to users who relies highly on accuracy, especially those in the fields of molecular biology, microbiology, immunology, cell culture, analytical chemistry, biochemistry, and genetics.

The high precision micropipette series are essential to those who relies on accuracy, especially users in the fields of molecular biology, microbiology, immunology, cell culture, analytical chemistry, biochemistry, and genetics. Its nine volume range covers the complete pipetting range from 0.2 μl to 100 μl to offer its user a wider selection to find the most suitable model for any application.

LabPRO products are specially designed to offer high performance with Swiss accuracy yet with economical value. The LabPRO Pipet Controller is a lightweight and ergonomic unit for use with plastic or glass pipettes from 0.1 to 100 mL. Its balanced design and contoured buttons help prevent hand fatigue even after hours of use. In addition, the speed and battery displays make pipetting easy!